(2) Specified areas for individual lots will be determined by calculating the area to be disturbed on the various categories of slope, its adjacency to water (if any portion of the site contains or if any portion of the site is surrounded by water) and by applying the appropriate adjustment factor indicated in Table Three

(3) Required calculations No soil or vegetation shall be disturbed nor shall any building or structure be erected. constructed or substantially enlarged unless and until it can be demonstrated by information, plans and studies furnished by the applicant that the following calculations have been completed

(a) Step one calculate the area of lot disturbance

(b) Step two determine the slope areas to be disturbed

(c) Step three apply the adjustment factor (Table Three)

(d) Step four calculate the total adjusted disturbed area

(e) Step five compare the maximum allowable disturbed area (MAD) for the given lot size (Table Two)

Step six calculate the required size of lot as per lot area adjustment formula.

(4) Lot area adjustment factors based on slope and adjacency to water All slope areas are assigned an adjustment factor (AF) to reflect the increased risk to the public of developing on more steeply sloping ground The greater the slope, the larger the required individual lot If lands within seventy-five (75) feet of the high-water line shall be determined to be adjacent to said stream or water body, the adjustment factor will be increased to the higher factor in accordance with the following table

Table Three - Schedule of Slope and Adjacency Adjustment Factors (AF)

(5) Total adjusted disturbed area (TADA) for a lot shall be computed by multiplying the square footage of the various slope areas to be disturbed by the adjustment factor for each slope area or slope area adjacent to a stream or water body as follows