The final plat shall be drawn by a licensed (N.J.) land surveyor or professional engineer, as the case may be, in ink, on tracing cloth, at a scale where one (1) inch equals not more than one hundred (100) feet, and in compliance with all the provisions of Chapter 338 of the Laws of 1953 (N.J.S.A 46:23-9.1 et seq.). The final plat shall show or be accompanied by the following

A. The date, name and location of the subdivision, name of owner, graphic scale and reference meridian.

B. Tract boundary lines, right-of-way lines of streets, street names, easements and other rights-of-way, bridges and culverts, land to be reserved or dedicated to public use, all lot lines and other side lines; with accurate dimensions, bearings or deflection angles, and radii, arcs and central angles of all curves.

C. The purpose of any easement or land reserved or dedicated to public use shall be designated, and the proposed use of sites other than residential shall be noted.

D. Each block shall be numbered and the lots within each block shall be numbered consecutively, beginning with No. 1.

E. Minimum buildings setback lines on all lots and other sites.

F. Location and description of all monuments.

G. Names of owners adjoining all subdivided lands.

H. Certification by engineer or surveyor as to the accuracy of details of plat.

I. Certification that the applicant is agent or owner of the land or that the owner has given consent under an option agreement.

J. If approval of a plat is required by any officer or body of the municipality, county or state, approval shall be certified on the plat.

K. Cross-sections and profiles of streets approved by the municipal engineer shall be required to accompany the final plat.

L. Contours at five-foot intervals for slopes averaging ten percent (10%) or greater, and at two-foot intervals for land of lesser slope.

M. Plans and profiles of storm and sanitary sewers on water mains.

N. Certificates from tax collector that all taxes are paid to date.